Menu info

DISPLAY	DESCRIPTION
MOT - NMOT - FCA - FCC	SYSTEM INFO: EL: Electromechanical OL: Hydraulic N: Absent Y: Present
TEMPO LAVORO M1	This menu item is available only for systems with Electromechanical motors. WORK TIME M1: Time taken by motor M1 to perform a complete opening/closing cycle. NOTE: With the control unit not installed, the work time is set to the maximum value of 60 seconds.
TEMPO LAVORO M2	This menu item is available only for systems with Electromechanical motors. WORK TIME M2: Time taken by motor M2 to perform a complete opening/closing cycle. NOTE: With the control unit not installed, the work time is set to the maximum value of 60 seconds.
NUM. MANOVRE	NUMBER OF MANEUVERS: Counter of the number of maneuvers (openings/closures) performed during the entire life cycle of the control unit.
STP FOT1 FOT2 SC	INPUT TEST: Allows checking the correct functioning of the inputs. The name associated with the input starts flashing when it is in an unrest state (for example, a normally closed (NC) contact flashes if it is open).
FCA1 FCC1 FCA2 FCC2	END-OF-TRAVEL INPUT TEST: Allows checking the correct functioning of the end-of-travel inputs. The name associated with the input starts flashing when it is in an unrest state (for example, a normally closed (NC) contact flashes if it is open). NOTE: Inputs can only be tested in the presence of the optional module for end-of-travel.