Logic

The control unit incorporates a 4-way Dip-switch with which it is possible to change some operating parameters.

DIP	Function	Description
1 ON 2 OFF	Opening Logic	- Remote Opening The PP command or radio command performs an opening. Only when the gate is completely open can a closing command be executed
1 OFF 2 ON	Opening Logic	- Open-Stop-Close-Stop The PP command or radio command performs an opening. If a new command is given while opening, a STOP is performed. If pressed again, it will perform a closing.
1 ON 2 ON	Opening Logic	- Commonhold The PP command or radio command performs an opening. Only when the gate is completely open will it close automatically after the pause time expires.
3 OFF	Water Hammer	- Disabled
3 ON	Water Hammer	- Enabled: At each opening, only when the gate is completely closed, a brief closure is performed to facilitate the unlocking of the electric lock.
4 OFF	LAMP Pre-Alert	- Disabled: The flashing light turns on simultaneously with the start of the maneuver.
4 ON	LAMP Pre-Alert	- Enabled: The flashing light turns on 2.5s before the maneuver.